Pruning Shrubs and Trees: A Timeline for the Year

The essentials

  1. Many shrubs and trees are pruned during the late dormant season, before bud break, which is the best time for most pruning.
  2. Summer-flowering shrubs bloom on new wood and are pruned in late winter or early spring; spring bloomers are cut right after they flower.
  3. Prune spring-flowering shrubs and trees immediately after bloom and no later than July 10 so next year’s buds can form.
  4. Oaks should not be pruned from April through October, when the fungus that causes oak wilt is most abundant.
  5. Dead, damaged and diseased branches can come off at any time of year, but work near utility wires belongs to the utility company.

Pruning is easier to get right once you know what a plant does under the bark. Some shrubs bloom on wood grown last summer, others on shoots that appear this spring, and that difference decides whether a cut now helps or removes next season’s flowers. This timeline follows the year stage by stage.

Why Pruning Timing Depends on the Plant

Cutting a plant changes its form and growth, and pruning doubles as preventive maintenance against insect and disease damage. Correct pruning during a plant’s formative years prevents many problems later.

Timing comes down to when a plant sets its flower buds. Spring-flowering shrubs bloom on one-year-old wood, the twigs that grew the previous summer, with buds forming from midsummer through fall and opening the next spring. Cut that wood in fall or winter and the flowers go with it. Summer-flowering shrubs bloom on new wood from the current season, so dormant pruning in late winter sets them up rather than setting them back.

Two groups need special handling. Oaks should not be pruned from April through October, when the fungus that causes oak wilt is most abundant. Bleeder trees, including birch, dogwood, elm, maple and styrax, take heavy pruning best in the coldest weather, with light work left for July.

Dead, damaged and diseased branches are the exception, and they can come off at any time of year.

Late Winter and Early Spring: Dormant Pruning

The late dormant season is the best time for most pruning: the framework is easy to see without leaves, and cuts before bud break give the plant a full season to respond.

Summer-flowering shrubs are pruned in this window, just before bud break in March or early April. The group includes butterfly bush, rose of Sharon, potentilla, Bumald and Japanese spirea, and Annabelle and Peegee hydrangeas. Trim off last year’s growth before spring growth begins, and cut smooth hydrangea to the ground if it needs a reset; it blooms on new wood.

Overgrown broadleaf shrubs such as privet, boxwood, holly and viburnum are trimmed in late February to the size you want. To rejuvenate one that has outgrown its spot, remove a third of the stems each year, never more than a third in a single year.

Aim for thinning cuts, which remove a whole stem at its point of origin and open the plant to light and air. Thinning is better than heading, which shortens a stem and triggers a wall of growth that shades the interior.

Pruning shears handle cuts up to 3/4 inch, lopping shears up to 1 1/2 inches, a hand saw branches over 1 inch, and a tri-cut or razor tooth saw limbs up to 4 inches. Keep cuts close to the branch collar, and start larger limbs from the underside so the bark does not tear.

Spring and Early Summer: Pruning After Bloom

Give spring bloomers their cut immediately after the flowers fade, and not later than July 10. The list includes lilac, azalea, forsythia, weigela and viburnum. Cutting them in fall or winter removes the flower buds that formed the previous summer.

Azaleas are the exception: light shaping can wait until after bloom, but an azalea that needs a hard reset can be cut back in February, giving up that spring’s flowers. Berry-producing shrubs such as holly and pyracantha are pruned while in flower so the fruit stays.

A lilac with many large stems responds well to the rule of thirds. Common lilacs flower only on 3-year-old wood, so remove a third of the large stems to the ground in the first spring, half of the rest in the second, and the remainder in the third, keeping some bloom each year while the plant renews itself. Loppers make the thick cuts; hand pruners handle canes under 1/2 inch.

Summer: Light Shaping and Deadheading

Summer is for light work and keeping faded flowers picked. Once a bloom fades, snip its stem close below the spent flower head, leaving the first full set of healthy leaves on the stem below your cut. Before shearing the top off a plant, look it over for flower buds tucked in among the faded blooms.

A plant that has finished flowering puts its energy into seed, and deadheading redirects that energy into roots and vegetative growth, which often means a second round of flowers. Skip it on self-seeders you want to spread, including hollyhock, foxglove, cardinal flower and forget-me-not. Yarrow, astilbe, tickseed, larkspur and garden phlox all respond well.

Light pruning on bleeder trees is done in July, and water sprouts can come off as you spot them. Hedge shears belong on hedges only. On narrow-leaf evergreens, do not trim away all the green foliage, because buds will not develop from brown wood.

Fall and Winter: What to Leave Alone

Fall is the time to put the pruners down for most woody plants. Pruning in fall or winter removes wood that already holds flower buds, which is why a lilac cut back in autumn blooms poorly the next spring.

Bigleaf and oakleaf hydrangeas are the plain example. Both bloom on old wood and begin setting next year’s flowers as soon as the current bloom finishes, so fall pruning, or heavy browsing by deer, produces few or no flowers the following summer. Some newer bigleaf selections flower on both old and new wood, including Endless Summer hydrangea, introduced in 2004.

Fall and winter are good for cleanup. Dead, damaged and diseased wood can be removed any time of year, since those cuts are about health rather than bloom. Leave seed pods and stems standing where they feed birds or add winter interest. Fall is also the moment to check the rest of the house, and A Fall Home Maintenance Checklist covers the jobs worth doing before the cold arrives.

Storm Damage, Dead Wood and When to Call an Arborist

Storm-damaged limbs are a different job and should be handled promptly. Prune weak or narrow-angled branches that overhang a home, driveway or sidewalk, and any branch that blocks the view at an intersection or hides the entry to your house.

Some work should not be a homeowner project. Have hazardous trees taken down rather than trimmed yourself, and leave anything close to a utility line alone. Trees too large for your reach and limbs that would need a ladder point to a certified arborist. If you work from a ladder, review Ladder Safety for DIY Jobs Around the House first.

Topping, cutting a tree back to stubs, invites health problems, ruins the plant’s natural shape and promotes suckering and weak branch structure.

Safety first

Never prune near electrical or utility wires. Contact the utility company or city maintenance workers for that work, and keep ladders and poles clear of any line.

A Simple Year-at-a-Glance Pruning Calendar

Many flowering shrubs do not need annual pruning; every two to three years is enough for plants that flower on younger wood.

Time of year Prune Hold off
Late winter, before bud break Summer-flowering shrubs; a third of the oldest stems on overgrown shrubs; smooth hydrangea if it needs a reset Spring-flowering shrubs, unless you accept losing that year’s blooms
Right after spring bloom Spring-flowering shrubs and trees, no later than July 10 Oaks, from April through October
Summer Light shaping; deadheading; water sprouts; light pruning on bleeder trees in July Heavy cutting on spring bloomers after mid-July
Fall and winter Dead, damaged and diseased wood; heavy pruning of bleeder trees in the coldest weather Spring-flowering shrubs and old-wood hydrangeas

Dead wood and storm damage can be removed at any time of year; anything near a wire belongs to a professional.

Common questions

What is the best time of year to prune most shrubs and trees?

The late dormant season, before bud break, suits most pruning. Summer-flowering shrubs are cut then, usually in March or early April, because they bloom on new wood produced in the current season.

Can I prune my hydrangea in the fall?

Not if it is a bigleaf or oakleaf hydrangea. Both bloom on old wood and set next year’s flowers as soon as the current bloom fades, so fall pruning reduces flowering. Smooth hydrangea blooms on new wood and can be cut to the ground in late winter or very early spring.

Is it ever too late to prune spring-flowering shrubs?

Yes. Prune them immediately after flowering, and not later than July 10, so the wood that will carry next spring’s flower buds has time to form.

Why should I avoid pruning oak trees in spring and summer?

Oaks should not be pruned from April through October, because the fungus that causes oak wilt is most abundant during those months.

This guide is general information, not professional advice. Follow the manufacturer’s instructions and your local building codes, and hire a licensed professional for electrical, gas, structural or roofing work.

This entry was posted in Outdoor and Garden. Bookmark the permalink.